5-50 Standard Telephone Features
E 5.2 Standard Telephone Features
Executive Busy Override — Extension
Allows you to connect to an existing intercom (extension) call.
If you make an intercom call and while hearing a busy tone;
1. Dial 2.
• You hear a confirmation tone (optional).
• A three-party conference is now established.
To leave the conference
1. Hang up.
• The other two parties continue their conversation.
Conditions
• This feature does not work when “Data Line Security” or “Executive Busy Override
Deny” is set at either or both of the other parties.
• “Class of Service” programming determines the extensions that can enable this feature.
• When a two-party call is changed to a three-party call or vice versa, a confirmation tone
is sent to all three parties. Eliminating the tone is programmable.
Programming References
• System Programming — Installation Manual
[505] Executive Busy Override
[601] Class of Service
[990] System Additional Information, Field (13)
Feature References
Conference
Data Line Security
Executive Busy Override Deny
1
1
To Next Page
Loading...
