4.4 Special Display Features
DPT Features 4-187
Call Directory
There are three Call Directory features as follows.
To use the Call Directory, you may shift the display to the Jog Dial Operation display by
pressing the SHIFT or MODE button first. Then follow the procedures on the following
pages.
Programming References
• User Programming (Section 3) / System Programming (Installation Manual)
[001] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
[003] Extension Number Set
[004] Extension Name Set
• System Programming — Installation Manual
[990] System Additional Information, Field (19)
• Station Programming (Personal Programming)
Station Speed Dialing Number/Name Assignment
(KX-T7431 / KX-T7433 / KX-T7436 / KX-T7235 only)
Extension Dialing
F
EATURE DESCRIPTION CONDITION
You can make an intercom
call using the directory.
Only items which have a
name assigned are displayed
in alphabetical order.
Items which have a name
assigned are displayed by
priority in stored order. If a
name is not assigned, the
number is displayed. The
displaying mode, name or
number, can be assigned in
System Programming.
System Speed Dialing You can make a call to a
party stored in the system
using the directory.
Station Speed Dialing You can make a call to a
party stored in your phone.
To Next Page
Loading...
