Standard Telephone Features 5-59
5.2 Standard Telephone Features O
Operator Call
Allows you to call an operator within the system. Two extensions can be assigned as
Operator 1 and 2.
1. Lift the handset.
2. Dial the feature number (0).
Conditions
• The call is routed to Operator 1 first. If Operator 1 is busy, it is routed to Operator 2.
Through System Programming, it is possible to change the routing so that Operator 1
and Operator 2 are called simultaneously when the operator is called.
• If an operator is not assigned, this feature is not available. You will hear a reorder tone.
Programming References
• System Programming — Installation Manual
[990] System Additional Information, Field (44)
1
2
To Next Page
Loading...
