Section 5
Standard Telephone Features
Contents
5.1 Basic Operation ...................................................................5-2
Making Calls.........................................................................5-2
Receiving Calls.....................................................................5-3
5.2 Standard Telephone Features (A - Z) .................................5-4
<Note>
If you use a dial pulse (DP) type standard telephone:
It is not possible to perform features which have “ ” or “#” in their
feature numbers.
When the “Pickup Dialing (Hot Line)” feature is set on your telephone, the
dialing sequence should be done within a certain period of time (Pickup
Dial Waiting Time — default: 1 sec.) after lifting the handset. To change
the time, System Programming is required. For programming instructions,
please consult with your dealer.
In this manual, the default feature numbers are used to describe each
operation and illustration. Use new programmed numbers if you have
changed a number by System Programming.
To Next Page
Loading...
