4.4 Special Display Features
4-196 DPT Features
DISPLAY
(KX-T7436)
(KX-T7431 / KX-T7433)
REQUIRED
PARAMETERS
FEATURE DESCRIPTION
Parallel On/Off (
→
1/0)
Parallel 1/0
Pickup Dialing (
→
1/0)
Pickup Dial 1/0
Pickup DL Prg (
→
..+#)
Pickup DL PG..#
Remote Timed Reminder
R-Timed Remind
Station Lock (
→
abcabc)
St.Lock abcabc
Station Program Clear
STA. Prog Clear
Timed Reminder
Walking COS (
→
code+ext)
WK.COS code+ext
Set whether a single line telephone connected
in parallel will ring (On) or not (Off) when
receiving a call.
— “Paralleled Telephone Connection”
Set or cancel the feature, calling to a pre-set
party by going off-hook. — “Pickup Dialing”
Store the extension or phone number to call a
party by going off-hook. — “Pickup Dialing”
Set the alarm ringing time for any extension.*
— “Timed Reminder, Remote (Wake-Up Call)”
Deny other people from using your telephone.
— “Electronic Station Lockout”
Clear the features set at your telephone.
— “Station Feature Clear”
Set the alarm ringing time.
— “Timed Reminder”
Call using your privileges at another extension.
— “Walking COS”
1 (On) / 0 (Off)
1 (Set) / 0 (Cancel)
Phone number + #
Refer to the corresponding
feature in Section 4.3,
“Operator / Manager
Service Features”.
None
KX-T7436
Refer to the corresponding
feature on page 4-184.
KX-T7431 / KX-T7433
To set: 1 + Hour (01-12)
+ Minute (00-59) +
(0: AM / 1: PM) +
(0: one time / 1: daily)
To cancel: 0
To confirm: 2
Password +
your extension number +
line access code (if
required) + phone number
abc: Lock code (000-999)
(To deny: twice /
To allow: once)
To Next Page
Loading...
