DPT Features 4-123
4.2 DPT Features T
Checking the setting time (with a display proprietary telephone only)
1. Lift the handset or press the SP-PHONE button.
2. Dial the feature number (76) and 2.
<Example>
If “10:10 AM” has been set, the display shows:
— one time
or
— daily
3. Hang up or press the SP-PHONE button.
Stopping the alarm
1. Lift the handset.
• Pressing any key also stops the alarm.
Conditions
• Be sure the system clock is set correctly.
• The alarm continues for thirty seconds.
• If an alarm time has not been set, the display shows the following:
• If you receive an incoming call during the alarm, the ringing starts after the alarm
stops.
• If you are having a conversation at the time the alarm is set to sound, the alarm starts
after the conversation.
• Station Message Detail Recording (SMDR) automatically records the detailed Timed
Reminder information (data, time, extension number, start/no answer). It is
programmable to print out when the Timed Reminder starts and the alarm is not
answered by System Programming.
• With the KX-T7431, KX-T7433, KX-T7436 and KX-T7235, you can set or cancel the
Timed Reminder using the display operation.
Alarm 10:10AM
Alarm 10:10AM
*
Alarm Not Stored
1
2
3
To Next Page
Loading...
