DPT Features 4-131
4.2 DPT Features V
With manual dialing
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the Voice Mail extension number.
• You can listen to the stored message by following the Voice
Mail guidance.
Conditions
• Outside callers can leave their messages in your mailbox. When an incoming outside
call arrives, the operator answers the call and forwards it to your extension. And...
— If you set the “Call Forwarding” function whose destination is Voice Mail;
The call will be forwarded to Voice Mail automatically.
— If you do not set the “Call Forwarding” function;
The call will return to the operator. Then the operator transfers the call to Voice
Mail.
• A flexible button can be assigned as the MESSAGE or FWD/DND button.
• Voice Mail can be assigned as the destination of the following features.
a) Call Forwarding — All Calls
b) Call Forwarding — Busy
c) Call Forwarding — No Answer
d) Call Forwarding — Busy/No Answer
e) Intercept Routing
• You can also transfer the received outside calls to certain mailboxes so that callers can
leave messages.
Programming References
• Station Programming (Section 2)
Flexible CO Button Assignment — FWD/DND Button,
Message Waiting (MESSAGE) Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
Feature References
Call Forwarding — All Calls, Busy, Busy/No Answer, No Answer
Intercept Routing (→ see Installation Manual)
Voice Mail Transfer
1
2
VM extension number
To Next Page
Loading...
