DPT Features 4-163
4.3 Operator / Manager Service Features
5. Enter the hour (01 through 12) and minute (00 through 59).
6. Dial 0 to enter AM, or 1 to enter PM.
7. Dial 0 for one time alarm setting*
1
, or dial 1 for daily alarm
setting*
2
.
• You hear a confirmation tone.
*
1
You hear an alarm ringing at the preset time and then the setting is cleared.
*
2
You hear an alarm ringing at the preset time every day until the setting is
changed or canceled.
8. Hang up or press the SP-PHONE/MONITOR button.
Conditions
• Be sure the system clock is set correctly.
• There is no limit to the number of the extensions who can set the Timed Reminder at
the same time.
• Station Message Detail Recording (SMDR) automatically records the detailed Timed
Reminder information (data, time, extension number, start/no answer). It is
programmable to print out when the Timed Reminder starts and the alarm is not
answered by System Programming.
Programming References
• System Programming — Installation Manual
[990] System Additional Information, Field (45)
Feature References
Timed Reminder
5
hour and minute
8
6
To Next Page
Loading...
