Standard Telephone Features 5-33
5.2 Standard Telephone Features C
Conditions
• If you want to return to the held call, flash the hookswitch before the destination
extension answers.
• If the destination extension does not answer the call within twelve rings (default),
“Transfer Recall” occurs. If the transferred call is an outside call, it is possible to select
whether Transfer Recall will go to the initiating extension or to Operator 1 by System
Programming.
• If there is no answer for thirty minutes after “Transfer Recall” starts, the line is
disconnected.
Programming References
• System Programming — Installation Manual
[201] Transfer Recall Time
[990] System Additional Information, Field (11)
Feature References
Transfer Recall (→ see Installation Manual)
To Next Page
Loading...
