Panasonic KX-TDA200 - Page 179

Start Signal Type
Selects the type of the start signal.
Default
Wink
Value Range
Immediate: Sends the dialed digits to the CO line when the First Dial Timer expires.
Wink: Sends the dialed digits to the CO line when the wink signal is received.
Maintenance Console Location
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Sending Caller ID to TIE
Specifies whether Caller ID information is sent when the channel type is TIE.
Default
No
Value Range
Yes, No
Maintenance Console Location
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Receiving Caller ID from TIE
Specifies whether Caller ID information is received when the channel type is TIE.
Default
Yes
Document Version 2008-11 PC Programming Manual 179
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)