Panasonic KX-TDA200 - Dss Key-Automatic Transfer for Extension Call; Transfer-Transfer to Busy Extension Without Bss Operation

Value Range
Disable: The DSS button will light up when a call arrives, but pressing it will not pick up the call.
Enable: The DSS button will flash when a call arrives, and pressing it will pick up the call.
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
3.1.6 Call Pickup
DSS Key—Automatic Transfer for Extension Call
Specifies
whether pressing a DSS or SDN button during an extension-to-extension call disconnects the current
call or places the call on consultation hold.
Default
Disable
Value Range
Disable: The PBX disconnects the current call, and calls the extension assigned to the DSS or SDN button.
Enable: The PBX places the current call on consultation hold.
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
3.1.8 Call Transfer
Transfer—Transfer to Busy Extension without BSS Operation
Enables a transferred call to be queued when the transfer destination is busy.
Default
Disable
Value Range
Disable:
The call is not transferred. (If the transfer destination has enabled the call waiting notification feature,
it is possible to inform the destination about the call transfer.)
Document Version 2008-11 PC Programming Manual 353
4.17 [2-9] System Options