Panasonic KX-TDA200 - Flexible Buttons

– For Sensor (EIO)—Input Signal Decision Time
– For Sensor (EIO)—Input Signal Detection Reopening Time
• 4.4 [2-3] Timers & Counters—Miscellaneous
—
External Sensor—Ring Duration
• 4.16 [2-8-3] Ring Tone Patterns—Call from Others—
External Sensor—Ring Tone Pattern Plan 1–8
• 7.7 [5-5] External Sensor
Feature Manual References
5.1.9 External Sensor
F
Flash/Recall/Terminate
• 3.11 [1-1] Slot—Port Property - LCO Port—
Disconnect Time
• 3.17
[1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Disconnect Time
• 6.1 [4-1-1] Wired Extension—Extension Settings
—Option 7—
Flash Mode during CO Conversation
• 6.5 [4-1-4] Wired Extension—Flexible Button— Type
• 6.10 [4-2-1] Portable Station—Extension Settings
—Option 7—
Flash Mode during CO Conversation
• 6.13 [4-2-3] Portable Station—Flexible Button
—
Type
• 6.17 [4-3] DSS Console— Type
Feature Manual References
6.1.2 Flash/Recall/Terminate
Flexible Buttons
• 4.4 [2-3] Timers & Counters—Miscellaneous
—
PT Display—PT Last Display Duration in Idle Mode
• 6.5 [4-1-4] Wired Extension—Flexible Button
• 6.6 [4-1-4] Wired Extension—Flexible Button
—Flexible button data copy
• 6.7 [4-1-5] Wired Extension—PF Button
• 6.13 [4-2-3] Portable Station—Flexible Button
• 6.17 [4-3] DSS Console
Feature Manual References
6.1.3 Flexible Buttons
Flexible Numbering/Fixed Numbering
• 4.8 [2-6-1] Numbering Plan—Main
– Extension
– Features
– Other PBX Extension
• 4.9 [2-6-2] Numbering Plan—Quick Dial
• 4.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
Feature Manual References
6.1.4 Flexible Numbering/Fixed Numbering
Document Version 2008-11 PC Programming Manual 797
14.2 Feature Programming References