Panasonic KX-TDA200 - Ring Tone Pattern Selection; Room Status Control

R
Redial, Last Number
• 4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone
–
Automatic Redial—Repeat Counter (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Automatic Redial—Redial Call Ring Duration (KX-TDA100/KX-TDA200/KX-TDA600 only)
–
Automatic Redial—Analog CO Mute / Busy Detection Timer (KX-TDA100/KX-TDA200/
KX-TDA600 only)
• 4.8 [2-6-1] Numbering Plan
—Main—Features—
Redial
• 4.17 [2-9] System Options—Option 2
– Redial—Automatic Redial when No Answer (ISDN) (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Redial—Save Dial After Connection to Redial Memory
– Redial—Call Log by Redial key
• 6.1 [4-1-1] Wired Extension—Extension Settings—Option 7— Outgoing Call Log Memory
• 6.10 [4-2-1] Portable Station—Extension Settings
—Option 7—
Outgoing Call Log Memory
Feature Manual References
15.1.1 Redial, Last Number
Ring Tone Pattern Selection
• 4.14 [2-8-1] Ring Tone Patterns—Call from CO—
Ring Tone Pattern Plan 1–8
• 4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
—
Ring Tone Pattern Plan 1–8
• 4.16 [2-8-3] Ring Tone Patterns—Call from Others—
Extension—Ring Tone Pattern Plan 1–8
• 4.17 [2-9] System Options—Option 1— PT Operation—PT Ring Off Setting
• 6.1 [4-1-1] Wired Extension—Extension Settings
—Option 1—
Ring Pattern Table
• 6.10 [4-2-1] Portable Station—Extension Settings
—Option 1—
Ring Pattern Table
Feature Manual References
15.1.2 Ring Tone Pattern Selection
Room Status Control
• 6.5 [4-1-4] Wired Extension—Flexible Button
— Type
• 6.17 [4-3] DSS Console— Type
• 8.2 [6-2] Hotel—Main— Hotel Operator—Extension 1–4
Feature Manual References
15.1.3 Room Status Control
S
SMDR (Station Message Detail Recording)
• 4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Analog CO Call Duration Start
• 4.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—
Outgoing CO Call Printout (SMDR)
• 8.2 [6-2] Hotel
816 PC Programming Manual Document Version 2008-11
14.2 Feature Programming References