EasyManua.ls Logo

Panasonic KX-TDA200 - Tone Length-Busy Tone; Dnd Tone

Panasonic KX-TDA200
824 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Recall—Disconnect after Recall
Specifies
the length of time after an extension with a CO line call on hold receives a Hold Recall tone that the
held call is disconnected.
Default
30 min
Value Range
1–30 min
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
3.1.2 Call Hold
Tone Length—Busy Tone / DND Tone
Specifies
the length of time that a busy/DND tone is heard when a call is made to an extension in busy status
or DND mode. A reorder tone will be sent when this timer expires. (For a call through DISA, the call will be
disconnected when this timer expires.)
Default
10 s
Value Range
0 (continuous)–15 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
4.1.9 DND (Do Not Disturb)
Tone Length—Reorder Tone for PT Handset
Specifies the length of time that a reorder tone is heard when using a PT handset. The PT will return to idle
status when this timer expires.
250 PC Programming Manual Document Version 2008-11
4.4 [2-3] Timers & Counters

Table of Contents

Other manuals for Panasonic KX-TDA200

Related product manuals