Panasonic KX-TDA200 - KX-TDA100;KX-TDA200 PMPR Software File Version 5.0 Xxx

• 3.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—
Loopback Test started by Network
• 4.9
[2-6-2] Numbering Plan—Quick Dial—
Use quick dial for rerouting to public CO when TIE line does
not work
• 9.5 [7-5] Miscellaneous
—
TRS Table Mode for Level N (N=2_6)
Changed Contents
• 1.1.2 Entering Characters
• 2.2.6 Start Menu—Connect—Modem
• 2.6.1 Utility—Diagnosis
• 2.6.2 Utility—File Transfer PC to PBX (SD Card)
• 3.1 [1-1] Slot—Supported Card Types
• 3.2 [1-1] Slot—Summary—
Card Type
• 4.17 [2-9] System Options—Option 4— Private Network—TIE Call by Extension Numbering (Optional
SD Card Required)
• 6.1 [4-1-1] Wired Extension—Extension Settings
—
Extension Number
14.1.3
KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
New Contents
• 2.2 Start Menu
Changed Contents
• 1.2.1 Installing and Starting the Maintenance Console
• 2.1 Introduction
• 2.3 File
• 2.4 Disconnect
• 2.5 Tool
• 2.6 Utility
• 3.27 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Document Version 2008-11 PC Programming Manual 779
14.1.3 KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx