Panasonic KX-TDA200 - Data Line Security; Dial Mode Selection

• 6.1 [4-1-1] Wired Extension—Extension Settings—Main— COS
• 6.10 [4-2-1] Portable Station—Extension Settings—Main— COS
Feature Manual References
3.1.19 COS (Class of Service)
CPC (Calling Party Control) Signal Detection
• 3.11 [1-1] Slot—Port Property - LCO Port—
CPC Signal Detection Time—Outgoing, Incoming
• 3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
– CPC Signal Detection (DID)—Outgoing, Incoming
– CPC Signal Detection (LCO/GCO)—Outgoing, Incoming
Feature Manual References
3.1.20 CPC (Calling Party Control) Signal Detection
CTI (Computer Telephony Integration)
• 3.30 [1-1] Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600
only)
• 4.8 [2-6-1] Numbering Plan—Main—Features— Dial Information (CTI)
• 4.17 [2-9] System Options—Option 6 (CTI)
Feature Manual References
3.1.21 CTI (Computer Telephony Integration)
D
Data Line Security
• 4.8 [2-6-1] Numbering Plan
—Main—Features—
Data Line Security Set / Cancel
• 6.1 [4-1-1] Wired Extension—Extension Settings
—Option 2—
Data Mode
Feature Manual References
4.1.1 Data Line Security
Dial Mode Selection
• 3.11 [1-1] Slot—Port Property - LCO Port
–
Dialing Mode
– DTMF Width
– Pulse Speed
• 3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
– CO Dial Mode
– DTMF Width
– CO Pulse Speed
Document Version 2008-11 PC Programming Manual 791
14.2 Feature Programming References