Panasonic KX-TDA200 - Start Menu-Connect-Profile Setup

2. Select a connection option.
• Select a Profile Name if you want to use a pre-saved profile.
a. Select the profile to use from the drop-down list.
b. If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be entered.
• To
enter the parameters manually, select the PBX Model and confirm that the Modem radio button is
selected.
a. Specify the settings as required. For more details, see the table below.
b. Enter the system password for the PBX.
3. Click Connect.
Connection Settings for Modem
Setting Values Description
Dial Number 1-9, 0, *, #, -, "," [comma],
T, P, W
Enter the telephone number to be dialed to
access the PBX.
T:
Converts the Dial Type from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Dial Type Auto(Tone), Auto(Pulse),
Manual
Specify the outgoing dialing method.
If Manual is chosen, dialing must be done
with a connected telephone.
Comment Max. 40 characters Enter a comment to identify the set of values.
Port COMx Specify the number of the COM port assigned
to the PC’s modem interface.
Only available COM ports will be displayed.
Baud Rate (bps) 1200, 2400, 4800, 9600,
19200, 38400
Specify the speed of data transmission.
Modem Initialize – Enter the modem initialize command, and
click Initialize to send the command to the
modem.
For more details, refer to your modem’s
instruction manual.
2.2.7 Start Menu—Connect—Profile Setup
Profiles are useful when one PC is used to connect to multiple PBXs. Rather than manually adjusting the
connection settings each time a different PBX is accessed, it is possible to store the connection settings for
several PBXs. Then, when you wish to connect to a specific PBX, you can simply choose that PBX
’s profile
from the list.
Note
When reinstalling or upgrading the Maintenance Console, it is possible to create a backup of all profiles.
This allows you to use the original connection settings with the new Maintenance Console.
The functions of the buttons on this screen are as follows:
Button Function
Profile File Opens or saves profiles as separate files.
30 PC Programming Manual Document Version 2008-11
2.2.7 Start Menu—Connect—Profile Setup