Panasonic KX-TDA200 - Group Call Pickup

Maintenance Console Location
4.8 [2-6-1] Numbering Plan—Main
Programming Manual References
12.1 [10-1] CO Line Settings
Feature Manual References
3.1.14 CO Line Access
Parallel Telephone (Ring) Mode Set / Cancel
Specifies the feature number used to set or cancel an SLT connected in parallel with a DPT to ring when
receiving an incoming call.
Default
*39
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan
—Main
Programming Manual References
None
Feature Manual References
13.1.2 Paralleled Telephone
Group Call Pickup
Specifies the feature number used to answer a call ringing at a certain call pickup group.
Default
*40
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan
—Main
Programming Manual References
5.7 [3-3] Call Pickup Group
Document Version 2008-11 PC Programming Manual 281
4.8 [2-6-1] Numbering Plan—Main