For details about how to change the status of a card, see To change the status (INS/OUS) of a card
(Interactive mode only) on screen 3.1 [1-1] Slot.
2.1.5 Display Options
The
View and Window menus provide options to control the display of items within the Maintenance Console.
• View
– Toolbar: Displays or hides the tool bar of commonly used buttons.
– Statusbar: Displays or hides the bar at the bottom of the Maintenance Console window.
– System Menu: Displays or hides the menu of PBX setting screens.
• Window
– Cascade: When multiple data screens are open, displays all open screens overlapped, with the title
bars visible.
– Tile(Horz): When multiple data screens are open, displays all open screens side by side.
– Tile(Vert): When multiple data screens are open, displays all open screens vertically.
2.1.6 Extension Number Setting
Many screens within the Maintenance Console software allow you to select extensions as part of programming
various features (for example, as members of a group). These screens use a standard window to make
selecting multiple extensions easy, accessed by clicking a button. This section explains how to use this
Extension Number Setting window.
To select multiple extension numbers, select the type of extension to display, highlight the extensions you wish
to add, then click the Add button. When finished, click OK. Data for the selected extensions will be added to
the first free spaces on the original screen.
Extension Type
Selects the types of extension numbers to display in Extension Numbers & Names List. Multiple items
can be selected. Items that are not available are shown with a grey checkbox.
Default
None selected.
Value Range
Wired Extension, Portable Station, VM Group(DPT), VM Group(DTMF), ICD Group, PS Ring Group,
OGM(DISA), External Pager, Analog MODEM
Extension Numbers & Names List
Displays all available extensions of the types selected in Extension Type, and names. Click entries to
select
them, and click the Add button when finished, to add the selected extensions. To deselect an entry, click
it again.
Default
Available extensions.
Value Range
Matching extensions
Document Version 2008-11 PC Programming Manual 25
2.1.6 Extension Number Setting
To Next Page
Loading...
