Disconnect Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the line.
Default
1.5 s
Value Range
0.5 s, 1.5 s, 2.0 s,
4.0 s, 12.0 s
Maintenance Console Location
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
6.1.2 Flash/Recall/Terminate
182 PC Programming Manual Document Version 2008-11
3.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
To Next Page
Loading...
