Panasonic KX-TDA200 - Page 254

7.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
9.1.11 Intercept Routing
4.1.7 DISA (Direct Inward System Access)
DISA—Disconnect Timer after Intercept
Specifies
the length of time that an intercepted DISA call rings at the intercept routing destination before being
disconnected.
Default
60 s
Value Range
0–60 s
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
7.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
4.1.7 DISA (Direct Inward System Access)
DISA—CO-to-CO Call Prolong Counter
Specifies the number of times that the caller can prolong a CO-to-CO line call on a DISA line. (Selecting "0"
enables the caller to prolong the CO-to-CO line call without restriction.)
Default
10
Value Range
0–15
Maintenance Console Location
4.4 [2-3] Timers & Counters
Programming Manual References
7.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
4.1.7 DISA (Direct Inward System Access)
254 PC Programming Manual Document Version 2008-11
4.4 [2-3] Timers & Counters