2. Break—Break 1–3 End—Hour, Minute
Specifies the start time for each break period. Times can only be set when 2. Break—Break 1–3 Start—
Setting is set to Enable.
Default
00:00
Value Range
00:00–23:59
Maintenance Console Location
4.6 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Manual References
17.1.3 Tenant Service
17.1.5 Time Service
270 PC Programming Manual Document Version 2008-11
4.6 [2-4] Week Table—Time Setting
To Next Page
Loading...
