Simplified Voice Message Access
Specifies the feature number used to access the SVM feature to record, listen to and delete messages.
Default
*38
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan
—Main
Programming Manual References
6.9 [4-1-7] Wired Extension—Simplified Voice Message
6.16 [4-2-5] Portable Station—Simplified Voice Message
Feature Manual References
16.1.5 SVM (Simplified Voice Message)
Other PBX Extension
Other PBX extension numbers can be used to easily call extensions connected to PBXs at different locations
in a TIE line network. The leading numbers of all PBXs in the network that will be called should be entered in
this table. A maximum of 16 leading numbers can be programmed.
Dial
Specifies the leading extension number of the other PBX.
Default
Not stored.
Value Range
Max. 3 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.8 [2-6-1] Numbering Plan
—Main
Programming Manual References
11.1 [9-1] TIE Table—
Leading Number
Feature Manual References
13.1.13 PRIVATE NETWORK FEATURES
304 PC Programming Manual Document Version 2008-11
4.8 [2-6-1] Numbering Plan—Main
To Next Page
Loading...
