Panasonic KX-TDA200 - Page 325

Feature Manual References
5.1.8 External Relay
Accept the Call from DISA
Enables reception of calls from DISA.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
4.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings
—Main—
COS
6.10 [4-2-1] Portable Station—Extension Settings
—Main—
COS
7.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
4.1.7 DISA (Direct Inward System Access)
Remote Operation by Other Extension
Allows
the Walking COS feature to be used from a remote location (inside the PBX, or outside the PBX using
DISA).
Default
Allow
Value Range
Allow, Deny
Maintenance Console Location
4.11 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
COS
6.10 [4-2-1] Portable Station—Extension Settings
—Main—
COS
Feature Manual References
20.1.1 Walking COS
Document Version 2008-11 PC Programming Manual 325
4.11 [2-7-1] Class of Service—COS Settings