Panasonic KX-TDA200 - Page 360

ISDN Option—Fwd from ISDN to ISDN
Specifies whether alert messages are sent to the ISDN network. This setting should be enabled for networks
that disconnect a call if an alert message is not received.
Default
Mode1
Value Range
Mode1: Disable
Mode2: Enable
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
None
Option 6 (CTI)
1st Party CTI—System status retry interval timer
Specifies the length of time until the alive check is retried when no response is received, for First Party Call
Control CTI.
Default
60 s
Value Range
0–60 s
Maintenance Console Location
4.17 [2-9] System Options
Programming Manual References
None
Feature Manual References
3.1.21 CTI (Computer Telephony Integration)
360 PC Programming Manual Document Version 2008-11
4.17 [2-9] System Options