For KX-TDA600:
Starting at 1001
(For
port 01 of the first extension card that is installed. Extension numbers are preset for subsequent extensions
by adding one to the previous extension number.)
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
3.6 [1-1] Slot—Port Property - Extension Port—Connection Command
Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Intercept No Answer Time—Day, Lunch, Break, Night
Specifies the length of time until an unanswered call is redirected to the intercept routing destination in each
time mode.
When this setting is set to "0", the system timer is used.
Default
0
472 PC Programming Manual Document Version 2008-11
6.1 [4-1-1] Wired Extension—Extension Settings
To Next Page
Loading...
