Panasonic KX-TDA200 - Page 536

Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone.
Default
Automatic
Value Range
Automatic, Specific
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
3.1.5 Call Park
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the extension belongs to are logged in to or logged out
from.
Default
None
Value Range
None: The incoming call distribution group is selected manually.
All: All incoming call distribution groups that the extension belongs to.
Incoming Group: A pre-specified incoming call distribution group
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
9.1.3 ICD Group Features—Log-in/Log-out
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Default
All
536 PC Programming Manual Document Version 2008-11
6.5 [4-1-4] Wired Extension—Flexible Button