Panasonic KX-TDA200 - Incoming Call Features; Incoming Trunk Call Features; Incoming Trunk Call Features-SUMMARY

1.1 Incoming Call Features
1.1.1 Incoming Trunk Call Features
1.1.1.1 Incoming Trunk Call Features—SUMMARY
Description
Incoming
calls via a trunk (public line) are distributed to their destinations according to one of several distribution
methods.
1. Available Networking Type for Each Optional Trunk Card Type
Each trunk port of an optional trunk card can be assigned a networking type: Public, Private, or VPN (Virtual
Private Network).
® 3.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Trunk
Property
® 3.25 [1-1] Slot—Port Property - E1 Port— Trunk Property
® 3.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)— Trunk
Property
® 12.2 [10-2] DIL Table & Port Settings—DIL— Trunk Property
Trunk Card Type
Channel Type
Networking Type
Public (DIL/DID/
DDI/MSN)
Private (TIE)
*1
Virtual Private
Network (VPN)
*2
ELCOT/LCOT — ü*
DID — ü*
T1 LCOT ü*
GCOT ü*
DID ü*
TIE (E & M)
ü
ü*
OPX (EXTN.)
E1 DR2 ü*
ü
E & M-C
ü
ü*
E & M-P
ü
ü*
E & M —
ü
ü*
BRI/PRI CO ü*
ü
Extension
QSIG-Master ü*
QSIG-Slave ü*
IP-GW — ü*
16 Feature Guide
1.1.1 Incoming Trunk Call Features