Panasonic KX-TDA200 - Absent Message

1.19.2 Absent Message
Description
An
extension
user can set or select a message (e.g., the reason for absence) to be displayed on his telephone.
When a display PT user calls the extension, the message is shown on the caller’s telephone. The following
messages can be programmed as desired:
Type
Message No. Message (Example) Description
System message 1
Will Return Soon
Messages may be edited through
system programming. They are
used for every extension user
commonly.
2
Gone Home
3 At Ext %%%% (Extension Num-
ber)
4 Back at %%:%% (Hour:Minute)
5 Out until %%/%% (Month/Day)
6
In a Meeting
7
8
Personal mes-
sage
9 A message is programmable at
each extension through personal
programming (Personal Absent
Message), which can only be
used by that extension user.
Note
The "%" means a parameter to be entered when assigning a message at an individual extension.
Up to seven "%"s can be stored for each message.
Conditions
• An extension user can select only one message at a time. The selected message is displayed at the
extension while on-hook.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan
—Main—Features— Absent Message Set / Cancel
6.1 [4-1-1] Wired Extension—Extension Settings—Option 3— Absent Message
6.10 [4-2-1] Portable Station—Extension Settings—Option 3— Absent Message
8.5 [6-5] Absent Message
PT Programming Manual References
[008] Absent Message
Feature Guide References
3.1 Capacity of System Resources
Feature Guide 231
1.19.2 Absent Message