1.13.4 Music on Hold
Description
Music can be played to a party that has been put on hold. The following music sources are available:
a. Internal music source
b. External music source
c. Cyclic tone
Music Source Assignment
[KX-TDA100/KX-TDA200/KX-TDA600]
BGM1,
BGM2, and cyclic tone can be selected as Music on Hold through system programming. External music
port 1 is assigned to BGM 1. It is possible to select whether external music port 2, internal music source 1, or
internal music source 2 is assigned to BGM2.
Having two external music ports, for example, allows the use of the BGM feature (® 1.17.4 Background Music
(BGM)), while assigning a separate external music source (e.g., company message, advertisement) to Music
on Hold.
[BGM Number and the Music Source]
BGM No.
Music Source
1
External music port 1
2
External music port 2, internal music source 1, or internal music source
2
Separate music sources can be assigned for the Music on Hold and the BGM features.
[KX-TDA30]
Only one external music port is available. If BGM is selected, it is possible to select whether external music
port, internal music port 1, or internal music port 2 is assigned to BGM.
Conditions
• Hardware Requirement: User-supplied music source (when an external music source is assigned)
• Volume Control
It is possible to change the volume of an internal and/or external music source.
• Each tenant can select a music source to use for Music on Hold. The type of call determines which
tenant’s music source is used, as follows:
Type
Music Source
Incoming Intercom Calls/Outgoing
Calls
Selected based on the tenant setting to which the exten-
sion user belongs.
Incoming Trunk Calls
Selected based on the tenant setting of the distribution
method (DIL/DID/DDI/MSN).
Installation Manual References
KX-TDA30
2.11.1 Connection of Peripherals
Feature Guide 179
1.13.4 Music on Hold
To Next Page
Loading...
