Panasonic KX-TDA200 - Call Forwarding (CF)-By QSIG

1.30.4.3 Call Forwarding (CF)—by QSIG
Description
The PBX forwards the call to a destination extension in another PBX in QSIG network. The destination can be
set on your own PBX on an extension basis as the forward destination of trunk calls (® 1.3.1.2 Call Forwarding
(FWD)).
If the same trunk group is used for the incoming call and the forwarded call, the following situation will be
possible.
[Example]
PBX-1
QSIG
PBX-2
Dials "2000".
PBX-1
QSIG
PBX-2
Extn. 1001 Extn. 2000
Extn. 1001 Extn. 2000
(Forward Destination
of Trunk Calls: 1001)
Call to 2000
1
Forwarded
to 1001
2
3
Extn. 1000
Extn. 1000
1
Extension 1000 of PBX-1 dials extension
number "2000",
and the call is sent to ex-
tension "2000" of PBX-2 through QSIG
network.
2
The call is forwarded to the forward des-
tination of trunk calls of extension 2000,
which is extension "1001" of PBX-1.
3
The call between PBX-1 and PBX-2 is
released, and the call is connected di-
rectly
to
the forward destination of exten-
sion 2000.
Conditions
• This feature complies with European Telecommunication Standard (ETS) specification ETS 300 257,
Diversion supplementary services.
• This feature can be enabled or disabled on each ISDN (QSIG) port of the PBX.
358 Feature Guide
1.30.4 QSIG Standard Features