Panasonic KX-TDA200 - Software Upgrading

2.3.8 Software Upgrading
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Data File Storage Area
Main Processing (EMPR/MPR) software da-
ta
Operating system data area on either the EMPR card
of the
KX-TDA600, the MPR card of the KX-TDA100/
KX-TDA200, or the Main Board of the KX-TDA30.
Default data of system programming for each
country/area
Country/area data area on the EMPR card, MPR card, or
Main Board.
Language data for PT display Each language data area on the EMPR card,
MPR card, or
Main Board.
There are two types:
Type 1: PT display except for PT system programming
(® 2.3.2 PT Programming) (5 languages max.)
Type 2: PT system programming data (one language max.)
LPR (software on a slot card) software data
(KX-TDA100/KX-TDA200/KX-TDA600 only)
Flash ROM on the slot card (e.g., BRI8)
Cell Station (CS) software data Flash ROM on the CS
Conditions
• The software version of the EMPR or MPR can be confirmed through system programming.
Installation Manual References
KX-TDA100/KX-TDA200
2.3.1 MPR Card
KX-TDA600
2.3.1 EMPR Card
PC Programming Manual References
3.3 [1-1] Slot—Card Property - MPR—
Memory Version:
PT Programming Manual References
[190] Main Processing (MPR) Software Version Reference
424 Feature Guide
2.3.8 Software Upgrading