Panasonic KX-TDA200 - Extension Feature Clear

1.28.2 Extension Feature Clear
Description
Extension users can clear all the following features set on their own telephone at once. This feature is also
known as Station Programme Clear.
Features After Setting
Absent Message Off
BGM Off
FWD*/DND* Off
Call Pickup Deny Allow
Call Waiting* Disable (In Canada, the default setting is "Enable" [Call
Waiting tone].)
Data Line Security Off
Executive Busy Override Deny Allow
Log-in/Log-out Log-in
Message Waiting All messages left by other extensions will be cleared.
Paging Deny Allow
Parallelled Telephone Paired SLT will ring.
Hot Line* Off
Timed Reminder Cleared
Note
The features with "*" can be programmed not to be cancelled by this feature.
Conditions
• Extension
Dial
Lock (® 1.9.3 Extension Dial Lock) and the extension personal identification number (PIN)
(® 1.28.1 Extension Personal Identification Number (PIN)) will not be cleared by this feature.
• For Users in Canada only
If dial tone 2 is heard after Extension Feature Clear:
After performing Extension Feature Clear, Call Waiting will be enabled if "Extension Clear: Call
Waiting" is set to "Clear" through system programming. In this case, dial tone 2 will be heard when
going off-hook. (® 1.29.1 Dial Tone)
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features—
Extension Feature Clear
4.17 [2-9] System Options—Option 2
→
Extension Clear—Call Waiting
→ Extension Clear—Fwd/DND
→ Extension Clear—Hot Line (Pickup Dial)
Feature Guide 319
1.28.2 Extension Feature Clear