Panasonic KX-TDA200 - Printing Message

1.26.2 Printing Message
Description
An
extension
user can select a message to be output on SMDR. Up to eight messages can be preprogrammed
in the Printing Message table, and are available to all extensions connected to the PBX. A message can contain
the "%" symbol, which requires a number to be entered in its place when the message is selected at an
extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of
information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign in
by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A connected
PC can then be used to generate employee work records.
Conditions
• Up to seven "%"s can be stored for each message.
PC Programming Manual References
4.8 [2-6-1] Numbering Plan—Main—Features—
Printing Message
8.2 [6-2] Hotel & Charge—Main— SMDR for External Hotel Application 2—Printing Message 1–8
PT Programming Manual References
None
Feature Guide References
1.26.1 Station Message Detail Recording (SMDR)
3.1 Capacity of System Resources
User Manual References
1.11.1 Using the Telephones in a Hotel-type Environment (Hospitality Features)
306 Feature Guide
1.26.2 Printing Message