1.17.5 Outgoing Message (OGM)
Description
An extension assigned as the manager (manager extension) can record outgoing messages (OGMs) for the
following features:
Feature Usage & Reference
Direct Inward System Access
(DISA)
When a call arrives on a DISA line, the caller will hear a message.
® 1.17.6 Direct Inward System Access (DISA)
Queuing Feature If assigned in the Queuing Time Table of the incoming call distribution
group, any caller who is waiting in a queue will hear a message.
® 1.2.2.4 Queuing Feature
Timed Reminder When answering the Timed Reminder Alarm, the user will hear a mes-
sage.
® 1.28.4 Timed Reminder
Conditions
• Hardware Requirement:
KX-TDA30: An MSG2 card or ESVM2 card
KX-TDA100/KX-TDA200/KX-TDA600: An OPB card, and MSG4 card, ESVM2 card or ESVM4 card
• Number of Messages
A maximum of 64 messages can be recorded.
• A floating extension number is assigned to each outgoing message (OGM) (default: 5 + two-digit OGM
number).
• One
MSG4 or ESVM4 card allows four messages to play simultaneously, and one MSG2 or ESVM2 card
allows two messages to play simultaneously. Increasing the number of cards does not increase the total
recording time or the number of messages; it increases the number of messages that can be played
simultaneously.
[Example]
Up to 4 (with the KX-
TDA100/KX-TDA200/KX-
TDA600) or 2 (with the
KX-TDA30) messages can
be played simultaneously
to callers.
PBX
MSG
Card
Total message recording time:
8 minutes max.
Up to 8 (with the KX-
TDA100/KX-TDA200/KX-
TDA600) or 4 (with the
KX-TDA30) messages can
be played simultaneously
to callers.
PBX
Total message recording time:
8 minutes max.
MSG
Card
MSG
Card
The maximum recording time for each card depends on the recording quality and the type of card used,
as follows:
196 Feature Guide
1.17.5 Outgoing Message (OGM)