1.33 Cellular Phone Features
1.33.1 Cellular Phone Features—SUMMARY
Description
This PBX
provides features to support the use of cellular phones and other outside destinations with the PBX.
Calls can be forwarded from virtual PSs to outside destinations such as cellular phones, and then answered
as if the user was at an extension within the PBX.
The following features can be used with cellular phones and other outside extensions:
Feature
Description & Reference
Outside Destinations in Incom-
ing Call Distribution Group
Up to 4 cellular phones can be assigned as members of an Incom-
ing Call Distribution (ICD) Group, and receive calls to the group.
® 1.2.2.3
Outside Destinations in Incoming Call Distribution Group
Cellular Phone XDP Parallel
Mode
A PT user can set up to 4 cellular phones to ring in parallel for in-
coming calls.
®
1.2.2.3
Outside Destinations in Incoming Call Distribution Group
DISA Automatic Walking COS Registered cellular phones are automatically recognised as PBX
extensions when calling through DISA.
® 1.17.6 Direct Inward System Access (DISA)
DISA Call Transfer From Out-
side Destination
A cellular phone user who answers a trunk call forwarded from the
PBX using DISA can transfer that call to an extension within the
PBX.
® 1.17.6 Direct Inward System Access (DISA)
Conditions
• Hardware Requirement
The KX-TDA6920, KX-TDA0920 or KX-TDA3920 SD Memory Card for Software Upgrade to Enhanced
Version
Feature Guide References
1.25.6 Virtual PS
384 Feature Guide
1.33.1 Cellular Phone Features—SUMMARY
To Next Page
Loading...
