Panasonic KX-TDA200 - Page 218

• The following features cannot be used when a sensor call is received:
– Alternate Receiving—Voice (®
1.5.3 Intercom Call)
– Hands-free Answerback (® 1.4.1.4 Hands-free Answerback)
– Consultation Hold/Call Hold (® 1.13.1 Call Hold)
– Call Transfer (® 1.12.1 Call Transfer)
– Executive Busy Override (® 1.8.2 Executive Busy Override)
• Sensor call information is output on SMDR.
Installation Manual References
KX-TDA30
2.5.1 DPH4 Card (KX-TDA3161)
2.5.2 DPH2 Card (KX-TDA3162)
2.10.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDA100/KX-TDA200
2.6.1 OPB3 Card (KX-TDA0190)
2.6.4 EIO4 Card (KX-TDA0164)
2.10.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
KX-TDA600
2.8.1 OPB3 Card (KX-TDA0190)
2.8.4 EIO4 Card (KX-TDA0164)
2.13.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
PC Programming Manual References
3.41 [1-1] Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
→
Input Signal Decision Time
→ Input Signal Detection Reopening Time
3.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
→
For Sensor (EIO)—Input Signal Decision Time
→ For Sensor (EIO)—Input Signal Detection Reopening Time
4.4 [2-3] Timers & Counters—Miscellaneous— External Sensor—Ring Duration
4.16 [2-8-3] Ring Tone Patterns—Call from Others— External Sensor—Ring Tone Pattern Plan 1–8
7.7 [5-5] External Sensor
PT Programming Manual References
None
218 Feature Guide
1.17.9 External Sensor