EasyManua.ls Logo

Panasonic KX-TDA200 - Page 247

Panasonic KX-TDA200
464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
An extension number can be assigned to each ISDN port.
® 6.1 [4-1-1] Wired Extension—Extension Settings—Main— Extension Number
Network Type (BRI only)
Each BRI port can be set to the requirements of each country/area.
® 3.14 [1-1] Slot—Port Property - BRI Port—Network—
Network Type
® [420] BRI Network Type
L1 Active Mode and L2 Data Link Mode (BRI only)
The active mode of Layer 1 (L1) and the data link mode of Layer 2 (L2) can be selected individually
(Permanent or Call by Call) on an ISDN port basis.
3.14 [1-1] Slot—Port Property - BRI Port—Network
® L1 Mode
® L2 Mode
® [425] BRI Layer 2 Active Mode
TEI Assignment Mode (BRI only)
The Terminal Endpoint Identifier (TEI) assignment mode can be selected on an ISDN port basis
® 3.14 [1-1] Slot—Port Property - BRI Port—Network— TEI Mode
® [427] BRI TEI Mode
Bearer Mode
The bearer mode can be assigned on an extension basis.
® 6.1 [4-1-1] Wired Extension—Extension Settings—Option 7— ISDN Bearer
® 6.10 [4-2-1] Portable Station—Extension Settings—Option 7— ISDN Bearer
Automatic ISDN Configuration
ISDN (BRI) port configuration can be set automatically through system programming.
® 2.5.2 Tool—BRI Automatic Configuration
The following items will be set by making and receiving a call using the subscriber number assigned for
each ISDN (BRI) port:
L1 Active Mode
L2 Data Link Mode
Access Mode (Point-to-Point/Point-to-Multipoint)
TEI Assignment Mode (Fix 00–63/Automatic)
PC Programming Manual References
2.5.2 Tool—BRI Automatic Configuration
3.13 [1-1] Slot—Card Property - BRI type/PRI type
3.14 [1-1] Slot—Port Property - BRI Port
3.15 [1-1] Slot—Port Property - BRI Port—Connection Command
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
3.17
[1-1] Slot—Port Property - PRI Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
4.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Extension Inter-digit
4.17 [2-9] System Options—Option 2— ISDN en Bloc Dial—[#] as End of Dial for en Bloc mode
6.1 [4-1-1] Wired Extension—Extension Settings
→Main—
Extension Number
→Option 7— ISDN Bearer
6.10 [4-2-1] Portable Station—Extension Settings
—Option 7—
ISDN Bearer
5.5 [3-1-4] Dialling Plan
—Auto Assign
PT Programming Manual References
[420] BRI Network Type
[424] BRI Layer 1 Active Mode
[425] BRI Layer 2 Active Mode
Feature Guide 247
1.21.1 Integrated Services Digital Network (ISDN)

Table of Contents

Other manuals for Panasonic KX-TDA200

Related product manuals