Panasonic KX-TDA200 - Page 250

Conditions
• The availability of this feature is dependent on the contract with the telephone company.
• CLIP/COLP features comply with the following European Telecommunication Standard (ETS)
specifications:
– ETS 300 092 Calling Line Identification Presentation (CLIP) supplementary service.
– ETS 300 097 Connected Line Identification Presentation (COLP) supplementary service.
• CLIR/COLR features comply with the following European Telecommunication Standard (ETS)
specifications:
– ETS 300 093 Calling Line Identification Restriction (CLIR) supplementary service.
– ETS 300 098 Connected Line Identification Restriction (COLR) supplementary service.
• The CLIP/COLP number for the connected ISDN port can be used for the ISDN terminal devices which
cannot be assigned their own CLIP/COLP number, such as a doorphone.
• COLP/CLIR/COLR Assignment for Each Port
Each service can be enabled or disabled on each ISDN port of the PBX.
• CLIR Button and COLR Button
It is possible to switch between CLIP and CLIR by pressing the CLIR button, and COLP and COLR by
pressing the COLR button. A flexible button can be customised as the CLIR or COLR button.
• The CLIP/COLP number must match the telephone number provided by the telephone company.
Otherwise it will be ignored or replaced by another number.
• When using a private network, the extension number assigned for each extension through system
programming is sent for CLIP/COLP. (® 1.30.4.2 Calling/Connected Line Identification Presentation
(CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG
)
PC Programming Manual References
3.14 [1-1] Slot—Port Property - BRI Port
→ISDN CO—
Subscriber Number
→Supplementary Service— COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, AOC-D, AOC-E, 3PTY
3.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
→CO Setting—
Subscriber Number
→Supplementary Service— COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT,
CCBS, AOC-D, AOC-E, 3PTY
3.19
[1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Subscriber Number
3.25 [1-1] Slot—Port Property - E1 Port— Subscriber Number
4.8 [2-6-1] Numbering Plan—Main—Features
→
COLR Set / Cancel
→ CLIR Set / Cancel
→ Switch CLIP of CO Line / Extension
4.17 [2-9] System Options—Option 4— Send CLIP of CO Caller to ISDN—when Transfer (CLIP of Held
Party)
5.13 [3-5-1] Incoming Call Distribution Group
—Group Settings—Main— CLIP on ICD Group Button
6.1 [4-1-1] Wired Extension—Extension Settings
→Main—
Extension Number
→ISDN CLIP— CLIP ID
→ISDN CLIP— CLIP on Extension/CO
→ISDN CLIP— CLIR
→ISDN CLIP— COLR
6.5 [4-1-4] Wired Extension—Flexible Button
—
Type
6.10 [4-2-1] Portable Station—Extension Settings
→ISDN CLIP—
CLIP ID
250 Feature Guide
1.21.1 Integrated Services Digital Network (ISDN)