Number in the Ta-
ble
Feature Description
(5) Call Charge Information The call charge meter pulses can be received
during a
conversation. (® 1.26.3 Call Charge
Services)
Conditions
• If an E1 line is used as a trunk, the channel type depends on the contract with the telephone company.
• If "MFC-R2" is selected as the Dial Mode, the PBX always sends a dial tone, instead of the telephone
company, when making a trunk call using E1 line.
PC Programming Manual References
3.25 [1-1] Slot—Port Property - E1 Port
3.26 [1-1] Slot—Port Property - E1 Port—Connection Command
PT Programming Manual References
None
Feature Guide References
3.2 Exclusive Features Table
266 Feature Guide
1.22.1 E1 Line Service
To Next Page
Loading...
