• Distinctive dial tones can be disabled. When disabled, dial tone 1 will be heard in all cases except those
marked with "*1" in the table above.
• Dial Tone Patterns
All dial tone patterns have a default (® 3.3.1 Tones/Ring Tones).
• Only dial tone 1 is sent to the extensions in the VM (DPT/DTMF) group. (® 1.24.1 Voice Mail (VM)
Group)
PC Programming Manual References
4.17 [2-9] System Options—Option 3
→
Dial Tone—Distinctive Dial Tone
→ Dial Tone—Dial Tone for Extension
→ Dial Tone—Dial Tone for ARS
PT Programming Manual References
None
Feature Guide 325
1.29.1 Dial Tone
To Next Page
Loading...
