Turning VM tone detection on/off
Th
e default setting is “On”.
1 MMENUN
M#N M3N M3N M2N
2 M N/M N: Select the desired setting.
MSAVEN MOFFN
Listening to voice mail
me
ssages
The unit lets you know that you have
new voice mail messages in the
following ways:
– “New Voice Mail” is displayed on
the handset and base unit
*1
if
message indication service is
available.
– The message indicator on the
handset flashes slowly if the message
alert feature is turned on (page 66).
*1 KX-TG7641 series: page 4
1 MMENUN
M#N M3N M3N M0N
R Th
e speakerphone turns on.
2 Follow the pre-recorded instructions.
3 When finished, press MOFFN.
Note:
R If the handset and base unit
*1
still
indicates there are new messages
even after you have listened to all
new messages, turn it off by pressing
and holding M#N until the handset or
base unit
*1
beeps.
R If your voice mail service uses voice
mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
R If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.
*1 KX-TG7641 series: page 4
68
For assistance, please visit http://www.panasonic.com/help
Voice Mail Service for Landline
To Next Page
Loading...
