21 | Page
© Nextiva, All Rights Reserved
4. Click Save at the bottom of the screen (Figure 3-17).
Figure 3-17: Save Changes
Entering the Provisioning Server
1. Enable the Web Configuration Utility and obtain the IP address of the phone. Select the Menu
softkey, and then select Settings and press #534 on the keypad to enable embedded web. Next,
select the Menu softkey again, and then select Settings and locate Information Display to locate
your phones IP Address.
2. Enter the IP address of the phone into the address bar of a web browser (Internet Explorer,
Firefox, Chrome, etc.) (Figure 3-18).
Figure 3-18: Navigate to the Phone’s IP Address
To Next Page
Loading...
