7 | Page
© Nextiva, All Rights Reserved
Installing the Panasonic KX-UTA336 Sidecar
The optional Panasonic KX-UTA336 sidecar allows for 36 additional flexible buttons (3 pages of 12) to be used
with the phone. These flexible buttons are used to make or receive calls, or perform a feature that has been
assigned to the button. Flexible buttons for the Panasonic KX-UTA336 are configured and used in the same way
as flexible buttons for the phone. A maximum of two Panasonic KX-UTA336 sidecars can be connected to the
phone.
NOTE: An AC Adaptor must be used to supply power when the Panasonic KX-UTA336 sidecar is installed to the
phone.
1. Remove any devices or cords connected to the USB port.
2. Remove the Add-on Key module slot cover (1) (Figure 1-9).
Figure 1-9: Add-on Key module slot cover
3. Connect the Panasonic KX-UTA336 (1) to the phone (2) by inserting the connector (3) into the Add-on
Key module slot (4) (Figure 1-10).
Figure 1-10: Connect the sidecar module
To Next Page
Loading...
