53 | Page
© Nextiva, All Rights Reserved
4. To call an entry in the list, press the Call softkey at the bottom of the screen (Figure 5-33).
Figure 5-33: Call the Entry
5. After the second party answers and you are ready to begin the conference call, press the
CONFERENCE button again to add the original party to the conversation. You are then speaking
with both parties at once.
6. To add a third party to the conference, repeat steps 1 through 5 above.
Using Speed Dials
1. Go off-hook or press the Speaker or Headset button.
2. Enter #, then the speed dial number, then press the Dial softkey at the bottom of the screen.
After a few seconds, the call initiates.
Using the Flexible Buttons
1. Press the FlexibleBtn softkey at the bottom of the screen (Figure 5-34).
Figure 5-34: FlexibleBtn
To Next Page
Loading...
