- 124 -- 124 -
6. Special Video Recording - HDMI Output of RAW Video Data
3 Set the HDMI input on the external recorder.
●
When the connection is complete, images will be displayed on the screen of the external recorder.
●
When the menu screen cannot be displayed, you can set [HDMI RAW Data Output] to [OFF] with one of the following
methods:
– Pressing a Fn button registered with [HDMI RAW Data Output]. (
160 / Register Functions to the Fn Buttons)
– Pressing [MENU/SET], [Q.MENU], and [Fn3] at the same time. ([Info Display (HDMI/SDI)] is switched to [AUTO].)
●
There are differences from normal HDMI output operation.
– [HDMI Rec Output] in the [Custom] ([IN/OUT]) menu.
[Down Convert] is not available. Outputs at the resolution and recording frame rate of the [Rec Quality].
– [Info Display (HDMI/SDI)] of the [Setup] ([IN/OUT]) menu
When [HDMI] is selected, it is switched to [AUTO].
When set to [AUTO], information is displayed to the external device that is output via SDI.
●
Also refer to the operating instructions for the external device.
■
[Rec Quality] (When [HDMI RAW Data Output] is selected)
[System Frequency]: [59.94Hz (NTSC)]
[Rec Quality] [Image Area of Video] Resolution Recording frame rate
5.9K/30p/16:9
[FULL] 5888x3312
29.97p
5.9K/24p/16:9 23.98p
4K/60p/17:9
[S35mm]
4128x2176
59.94p
4K/30p/17:9 29.97p
4K/24p/17:9 23.98p
3.5K/30p/4:3*
1
3536x2656
29.97p
3.5K/24p/4:3*
1
23.98p
[System Frequency]: [50.00Hz (PAL)]
[Rec Quality] [Image Area of Video] Resolution Recording frame rate
5.9K/25p/16:9 [FULL] 5888x3312 25.00p
4K/50p/17:9
[S35mm]
4128x2176
50.00p
4K/25p/17:9 25.00p
3.5K/50p/4:3*
1
3536x2656
50.00p
3.5K/25p/4:3*
1
25.00p
*
1
Anamorphic (4:3) video
To Next Page
Loading...
