- 125 -- 125 -
6. Special Video Recording - HDMI Output of RAW Video Data
●
Bit value: 12-bit
●
Audio format: LPCM (2ch)
●
[Image Area of Video] is fixed to the image area according to the [Rec Quality] setting.
●
The following functions are not available:
– [Filtering] and [add to list] in [Rec Quality]
– [Rec Quality (My List)]
●
When the XLR Microphone Adaptor (DMW-XLR1: optional) is attached, [XLR Mic Adaptor Setting] can be set to
[96kHz/24bit] or [48kHz/24bit].
■
SDI output display when outputting RAW video data
The images output via SDI will display images that are equivalent to when recording in V-Log for checking purposes. [V-Log
View Assist] can use [LUT View Assist (SDI)] applied with the preset [Vlog_709].
●
The LUT for the SDI output display cannot be changed.
●
When you use [LUT View Assist (SDI)], [709] is displayed on the screen and [RAW] is displayed on the screen as a [LUT
View Assist (HDMI)] item.
●
[Luminance Spot Meter], and [BASE/RANGE] of [Zebra Pattern] are set at “Stop” units. (Calculated as “0 Stop”=42% (IRE))
■
[HDMI Time Code Output] / [HDMI Recording Control]
The time code of the camera can be added and output via HDMI to the external recorder.
Recording can also be started and stopped on the external recorder by using the video rec. button of the camera.
Set [HDMI Time Code Output] to [ON].
●
[MENU/SET] [ ] [ ] [Time Code] [HDMI Time Code Output] [ON]
Set [HDMI Recording Control] to [ON].
●
[MENU/SET] [ ] [ ] [HDMI Rec Output] [HDMI Recording Control] [ON]
●
[HDMI Recording Control] can be set when [HDMI Time Code Output] is set to [ON].
You can simultaneously output via SDI to a different external recorder, add a time code, and start/stop of recording.
Set the menu.
– [MENU/SET]
[ ] [ ] [Time Code] [SDI Time Code Output] [ON]
– [MENU/SET]
[ ] [ ] [SDI Rec Output] [SDI Recording Control] [ON]
To Next Page
Loading...
