- 14 -- 14 -
1. Introduction - Names of Parts
39 [SDI OUT] terminal ( 22 / Connecting the external monitor)
●
This connects external monitors etc. and outputs an SDI signal.
40 [TC IN/OUT] terminal (
63 / Preparations for Time Code Synchronization)
●
This connects with an external device and inputs/outputs a time code.
41 [GENLOCK IN] terminal (
66 / Genlock settings)
●
This connects with an external device and inputs a sync signal.
42 HDMI terminal cover
43 [USB] terminal
●
You can control the camera remotely by connecting with a PC that has the “LUMIX Tether” software installed. ( 216 /
Tethered Recording)
●
Import shooting data by connecting with a PC. ( 151 / Importing Images to a PC)
44 [HDMI] terminal (Type A) (
22 / Connecting the external monitor)
●
This connects with an external monitor etc. and outputs a video signal.
To Next Page
Loading...
