- 13 -- 13 -
1. Introduction - Names of Parts
■
Back
29
34
38
42
30
31
32
35
33
39
40
41
43
44
36
28 Rear tally lamp ( 264 / Lamp / Indicator Display)
●
This works the same as the front tally lamp. You can set whether to make the lamp light at the menu screen separately
from the front tally lamp. (
200 / [Tally Lamp])
29 AUDIO terminal cover
30 [MIC] terminal (
145 / External Microphones (Optional))
●
This connects the external microphone.
31 Headphone terminal (
149 / Headphones)
●
This connects the headphones for the audio monitor.
32 [LAN] terminal
●
Supplying power from a PoE+ power supply. ( 17 / Supplying power from a PoE+ power supply)
●
You can control the camera remotely by connecting with a PC that has the “LUMIX Tether” software installed. ( 216 /
Tethered Recording)
●
You can remotely operate the camera by connecting it with a LAN cable to the wireless access point to which the
smartphone that has the “LUMIX Tether” software installed is connected to. (
233 / Connecting to a Smartphone
(Wired LAN connection))
●
You can live stream the camera’s images and audio over the internet by connecting a PC installed with the streaming
software and the camera to a router. (
249 / 13. Streaming Function)
33 Security Slot
●
Attaching anti-theft equipment can prevent theft. We are not liable for damages that may occur resulting from theft.
34 DC IN terminal cover
●
Keep the DC IN terminal cover out of reach of children to prevent swallowing.
35 Cable lock band attachment part (
23 / Attaching the Cable Lock Band)
36 Battery attachment part
37 Battery release button
38 BNC terminal cover
To Next Page
Loading...
