- 234 -- 234 -
12. Remote Operations - Connecting to a Smartphone
Terminating the Wired LAN Connection
To end the connection between the camera and smartphone, follow the steps below.
Set the camera to recording mode.
Terminate the wired LAN connection.
●
[MENU/SET] [ ] [ ] [LAN / Wi-Fi] [LAN / Wi-Fi Function] [Yes]
●
You can also perform the same operation by pressing the Fn button assigned with [LAN / Wi-Fi]. ( 215 / Fn Button
Assigned with [LAN / Wi-Fi])
On the smartphone, close the “LUMIX Sync”.
●
For the cable that connects to the LAN terminal, use the one below.
– LAN cable (STP (Shielded Twisted Pair), category 5e or above, maximum 100 m (328 feet))
●
Also refer to the operating instructions for the wireless access point.
To Next Page
Loading...
